INSTEON Thermostat Adapter - Totaline / Venstar Compatible

Easy To Install
Once you've installed your thermostat, INSTEON Thermostat Adapter snaps right into the jack on the bottom of your thermostat. Now all you need to do is set the thermostat to the mode/temperature you want and link it to the INSTEON controller of your choice, using INSTEON's simple Plug-n-Tap setup. Every time you activate that scene on the controller, your thermostat will return to the corresponding temperature. From plugging in your INSTEON Thermostat Adapter to changing the temperature from an INSTEON controller, setup takes as little as a couple of minutes.


Non-Volatile Memory
All Thermostast Adapter settings are stored in non-volatile memory and are not lost during power failures.

Certifications and Warranty
All INSTEON products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind the entire line of Smarthome-Brand INSTEON products with a full 2-year warranty.

Specifications
General
Brand:	Smarthome
Manufacturer:	SmartLabs Design
Manufacturer Product No.:	2441V INSTEON Thermostat Adapter for Venstar/ Totaline
UPC:	718122387212
Color:	White
Range:	150' (line of sight)
Frequency:	915 MHz
Warranty:	2 years
Compatible Thermostats
Carrier/Totaline Residential:	P374-1700, P374-1800, P374-1900
Venstar Residential:	T1700, T1800, T1900
Carrier/Totaline Commercial:	P374-2700, P374-2800, P374-2900
Venstar Commercial:	T2700, T2800, T2900
Operation
Status LED:	1 Green LED (normally on)
Setup Memory:	Non-volatile EEPROM
Software Supported features (as avail via software)
Heat set point:	Supports all set points of Thermostat
Cool set point:	Supports all set points of Thermostat
Temperature Status Request:	Supported
Humidity Status Request:	Supported
Mode Status Request:	Supported
Fan Status Request:	Supported when in “Auto” mode
Mode Control:	Heat, Cool, Auto, OFF
Fan Control:	On, Auto
Degree Format (F/C):	As Supported by Thermostat
INSTEON Features
INSTEON Addresses:	1 hard-coded out of 16,777,216 possible
INSTEON Links:	417 out of 16,777,216 possible
INSTEON Messages Repeated:	Yes
Mechanical
Operating Conditions:	Indoors, 32 to 122°F, up to 85% relative humidity
Storage Conditions:	Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions:	1.75" H x 2.89" W x .58" D
Weight:	.80 oz
Connector:	RJ11 4 wire (top of unit)
Electrical
Input Power:	5VDC 30mA Standby (Powered from Thermostat)
FCC Certification:	ID SBP2441
Industry Canada Certification:	IC :S202A-2441V

• INSTEON Thermostat Adapter
  
• Quick-Start Guide