Easy To InstallThe INSTEON ApplianceLinc (3-Pin) is easy to install and set up and yet so affordable, you'll want to add ApplianceLinc on/off modules to all of your appliances that you want to INSTEON ApplianceLinc (3-Pin), and then plug the module back into the wall outlet. Link the ApplianceLinc to an INSTEON controller using the Plug & Tap programming method, and you'll be able to turn the appliance on and off from any linked INSTEON-compatible controller. If this is your first INSTEON installation, the best way to ensure you get everything needed to provide the most reliable communication among devices is to buy the complete INSTEON Lamp Scene Lighting Starter Kit, which includes everything required to set up your INSTEON network, including two INSTEON LampLinc Dimmers (3-Pin), a pair of INSTEON SignaLinc RF Signal Extenders to ensure INSTEON network reliability, and the desktop ControLinc. Learn more about INSTEON here.
Pass-Through OutletIn addition to the INSTEON-controlled outlet, the ApplianceLinc offers a non-controlled outlet on the front face, so you won't have to unplug your appliance module just to find a place to plug in the vacuum cleaner.
Create Multi-Way CircuitsThe INSTEON ApplianceLinc (3-Pin) allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3-, 4-, or 5-way controlled appliances. Plug the device you want to include in the circuit into the module, then plug the ApplianceLinc into an open outlet. Link the ApplianceLinc to all the INSTEON-compatible wall switches and tabletop controllers that you want to control the ApplianceLinc for a flexible, fully functional multi-way controlled appliance.
Scene Lighting Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the ApplianceLinc can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on an INSTEON controller. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights and appliances can turn on or off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, try the INSTEON KeypadLinc Dimmer.
Status LEDGet a visual indication when ApplianceLinc is sending or receiving INSTEON or X10 signals. The Status LED is also used for setup programming.
CompatibilityThe INSTEON ApplianceLinc (3-Pin) is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that the module can respond to X10 commands from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10.
Non-Volatile MemoryAll ApplianceLinc settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the ApplianceLinc will return the appliance to its last on/off state when power is restored.
Certifications and WarrantyAll INSTEON ApplianceLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. In order to meet the ISO 9001 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, Smarthome stands behind the entire INSTEON ApplianceLinc line of products with a full 2-year warranty.
Specifications |
| General |
| Brand: | Smarthome |
| Manufacturer: | SmartLabs Design |
| Manufacturer Product No.: | 2456S3, INSTEON ApplianceLinc (3-Pin) |
| UPC: | 891114000075 |
| Warranty: | 2 years (upgradedable to 7 years) |
| Operation |
| Status LED: | White |
| Local Control: | Available (Tap Set button) |
| Load Sensing: | Available (Off by default) |
| Operation Modes: | INSTEON only, X10 only, INSTEON and X10 Combo Mode |
| Combo Mode Message Order: | INSTEON, X10, INSTEON cleanup |
| Setup Memory: | Non-volatile EEPROM |
| INSTEON Features |
| INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible |
| INSTEON Links: | 417 |
| INSTEON Powerline Frequency: | 131.65 KHz |
| INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms |
| INSTEON Minimum Receive Level: | 10 mV |
| INSTEON Messages Repeated: | Yes |
| Mechanical |
| Operating Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity |
| Dimensions: | 4.0" H x 2.5" W x 1.5" D |
| Weight: | 5 oz |
| Electrical |
| Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase |
| Surge Protection: | MOV rated for 150 Volts |
| Power Plug: | 3-pin grounded |
| Pass-through Outlet: | 3-pin grounded |
| Controlled Outlet: | 3-pin grounded |
| Maximum Load: | 480 Watts |
| Maximum Amps: | 15 Amps (for inductive loads) |
| Certification: | Safety tested for use in USA and Canada (ETL #3017581) |
| X10 Features |
| X10 Primary Address: | 1 optional (comes unassigned) |
| X10 Scene Addresses: | 255 possible |
| X10 Status Request: | Supported |
| X10 Powerline Frequency: | 121 KHz |
| X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms |
| X10 Minimum Receive Level: | 10 mV |
| X10 Messages Repeated: | No |
- INSTEON ApplianceLinc V2 3-Pin
- Quick-start guide
